(786) 496-4049 Contact Us

Sprinkler and Irrigation Controller Repair in Miami

Fix, upgrade and program your sprinkler timer so every zone runs when it should.

  • Miami-Dade local team
  • Over 20 years of experience
  • Clear quotes before any work
  • Lawn and landscape irrigation only
Wall mounted irrigation timer

A blank sprinkler timer, one dead station and a system watering twice are different problems. We check power, clock, active programs and the rain sensor first, then test controller output and field wiring. A good controller should not be replaced because a valve wire failed.

If a zone runs manually but misses its scheduled run, start with our timer programming guide and manual lookup. If it never opens, the zone troubleshooting guide explains the next checks. We restore schedules, repair supported components or explain replacement options when the board is damaged or parts are unavailable.

After service, we label the stations, check the shutoff sensor and run each zone. We set allowed Miami-Dade watering days and check for duplicate start times. Considering an upgrade? Compare a smart controller with a standard timer, including Wi-Fi needs and ongoing setup.

Controller service includes

  • Full controller and wiring diagnosis
  • Weather based schedule programming
  • Wi-Fi controller installation and app setup
  • Rain sensor testing
  • A run of every zone to confirm

Ask for a free irrigation controller and timer repair estimate

Common problems we fix

Free system check on your first visit

Your first visit includes a zone by zone check, so you know exactly where your system stands before you decide on any work.

Book your free system check

Sprinkler controller symptoms and what they usually mean

The display and the pattern of failed zones point to the cause before any part is replaced. These are the controller problems we see most, with the usual suspects for each.

  • Blank or flickering screen: no power at the outlet, a tripped GFCI, a failed plug-in transformer or surge damage to the board
  • One station never runs: a run time set to zero, a station left out of the program, a broken valve wire, a failed solenoid or a dead output
  • Several zones stop at once: often the shared common wire, an active rain sensor or a fault in the controller itself
  • Zones run on the wrong days or twice: an old program still active, an extra start time or a clock that reset after an outage
  • Nothing runs after a storm: an active rain sensor that has not dried out yet, or a program wiped by a power surge
  • Fault or short message on the display: many controllers flag a shorted wire or solenoid and skip that station until it is fixed
  • Wi-Fi controller offline: a new router, a changed password or a weak signal at the wall; see smart sprinkler controller not working

Rain Bird, Hunter and Wi-Fi controllers

We work on the residential controllers Miami homeowners most often have, including Rain Bird and Hunter timers, along with Wi-Fi and weather based models. Many yards have a newer controller wired to valves from an older install, so we test the field wiring and the valves as well as the controller.

Brand matters less than the fault. A dead station is checked the same way on any model: confirm the program, measure the station output, then test the wire and solenoid. Wi-Fi controllers add network checks. Some models, such as Hunter Hydrawise, keep running the last schedule stored on the controller while they are offline, but they cannot apply weather adjustments until they reconnect. We set up the app and the schedule, and if a board has failed or parts are no longer available, we explain the replacement options before any work.

Our irrigation controller and timer repair process

  1. Inspect

    We run every zone and walk the property to see what the system is really doing.

  2. Diagnose

    We test heads, valves, wiring, pressure and the controller to find the cause, not just the symptom.

  3. Quote

    You get a clear price before any work starts. No surprise fees.

  4. Fix

    We repair or replace the controller, fix wiring faults and program a schedule that fits the season.

  5. Confirm

    We run the zones again and check coverage, so you see the result before we leave.

Serving Coral Gables, Coconut Grove, South Miami, Pinecrest, Kendall, Miami Beach, Doral, Brickell and the rest of Miami-Dade County. See every area we serve

Frequently asked questions

Should I repair or replace my old irrigation timer?

Repair makes sense when the fault is a setting, connection or available replacement component and the rest of the unit is reliable. Repeated board failures, several dead outputs or unavailable parts may favor replacement. Wi-Fi alone does not guarantee water savings; the system and zone settings still need to be right. Request an estimate so we can compare the options after testing.

Can you set up the app on my phone?

Yes. We install the controller, connect it to your Wi-Fi and show you how to use the app, including how to pause for rain and how to set the right days for your address. Ten minutes of setup saves a lot of frustration. If your Wi-Fi does not reach the garage or side yard, we tell you before you buy. Book a controller visit.

Why do my sprinklers run on the wrong days?

Often an old program is still active, a second start time was added by mistake or the clock reset after an outage. We clean up the programs and set the schedule your address is allowed under the Miami-Dade rules. That stops surprise runs and the risk of a citation. If yours ran at midday or on the wrong day this week, book a repair.

Do smart controllers really work in Miami's climate?

They can, when they are set up for local conditions. Weather based controllers skip runs after rain and trim run times in cooler months, and pairing them with a rain or soil moisture sensor adds another layer. The key is programming them to the county's watering days and windows. We set them up correctly and check them on maintenance visits.

What happens to my controller after a power outage or storm?

Many older timers lose their program or clock after an outage, and surges can damage the board. If your schedule looks wrong after a storm, it probably is. We restore the program, test every zone and can add surge protection or move you to a controller that keeps its settings. Storm season is the time to check. Request a visit.

Still have a question? Send it to our team with your estimate request and we will answer it on the call.

Get your free estimate

Tell us what is going on with your system and we will get back to you with next steps and a clear price.

CallGet a Free Estimate