Irrigation Pump Repair in Miami
For systems that draw from a well, canal or lake instead of the water meter.
- Miami-Dade local team
- Over 20 years of experience
- Clear quotes before any work
- Lawn and landscape irrigation only
Many Miami-Dade homes and communities water from a private well or a lake instead of city water. That saves on the water bill, but it adds a pump, a pump start relay and a suction line that all have to work together every watering day.
We find out why the pump will not start, runs without pushing water or makes the heads sputter, then repair the irrigation side and confirm the controller is starting it correctly. Every zone runs before we leave so you can see the pressure is back.
Pump service includes
- Checking the controller signal and the pump start relay
- Priming checks and suction line inspection
- Foot valve, intake screen and check valve inspection
- Pressure test and a run of every zone
- A plain written note on the pump's condition
Common problems we fix
- Low pressure or weak spray: heads that barely pop up or throw water short
- Zone will not turn on: usually the program, the rain sensor, a wire or the valve
- Zone will not shut off: turn off the water first, then find the stuck valve or program
- Timer losing its program: blank screens, dead stations or a schedule wiped after an outage
- Wet or soggy spots: ground that stays wet between watering days often means a leak
Free system check on your first visit
Your first visit includes a zone by zone check, so you know exactly where your system stands before you decide on any work.
Our irrigation pump repair process
Inspect
We run every zone and walk the property to see what the system is really doing.
Diagnose
We test heads, valves, wiring, pressure and the controller to find the cause, not just the symptom.
Quote
You get a clear price before any work starts. No surprise fees.
Repair
We repair the relay, suction side or fittings that failed, re-prime the pump and run every zone at full pressure.
Confirm
We run the zones again and check coverage, so you see the result before we leave.
Serving Coral Gables, Coconut Grove, South Miami, Pinecrest, Kendall, Miami Beach, Doral, Brickell and the rest of Miami-Dade County. See every area we serve
Frequently asked questions
My pump runs but the sprinklers barely spray. What is wrong?
Most often the pump has lost its prime, the intake or screen is clogged, a foot or check valve is leaking back, or air is getting into the suction line through a loose fitting. Less often the impeller is worn. Running a pump without water can damage it, so turn it off if you hear it racing or see no flow. We trace the cause instead of just re-priming and hoping. Book a pump check.
Why does my pump click on when no zone is running?
That usually points to a pressure leak somewhere downstream, such as a weeping valve or a cracked pipe, or to a relay or controller setting that calls the pump without a zone. Short cycling wears out the motor and the relay quickly. We test the relay and the program first, then look for the leak. If it turns out to be underground, our leak repair team finds it without trenching the yard.
Do the watering restrictions apply if I water from a well or lake?
Yes. Miami-Dade's two days a week schedule and the 10 a.m. to 4 p.m. ban apply to every source, including private wells, canals, lakes and ponds. Only 100% reclaimed water is exempt. We set your controller to your allowed days so the pump only runs when it should, which also saves wear and electricity. Read our Miami-Dade watering restrictions guide for the full rules.
Is it the pump or the controller that failed?
A quick test tells us. The controller sends a low voltage signal to a pump start relay, which switches the pump's power on. If the controller sends the signal and the relay does not close, the relay is the problem; if there is no signal, it is the controller or its program. We check this first so you do not replace a good pump. Problems in the household electrical supply that feeds the pump are work for a licensed electrician, and we will tell you if that is where the fault is. Request a visit.
Should I repair or replace an old irrigation pump?
If the motor and housing are sound, replacing a seal, a check valve or a relay is usually good value. A pump that overheats, trips its breaker or has lost performance more than once may cost less to replace than to keep reviving. We show you which parts failed and give you both options with prices before any work. You decide with the facts in front of you. Request a free estimate.
Can lake water clog my sprinkler heads?
It can. Lake and canal water carries algae, sand and organic matter that collects in intake screens, valve diaphragms and nozzle filters. Keeping the intake off the bottom and the screen clean prevents most of it. We clean the screens we can reach, flush the lines and tell you if a filter would help your setup. Regular irrigation maintenance visits catch buildup before it stops a zone.
Still have a question? Send it to our team with your estimate request and we will answer it on the call.
More sprinkler repair services
Sprinkler Valve Repair
Find and fix buried, stuck or leaking valves when a zone will not turn on or will not shut off.
Sprinkler Leak Repair
Track down underground irrigation leaks before they damage your lawn and raise your water bill.
Irrigation Controller & Timer Repair
Repair, replace and program sprinkler timers, including Wi-Fi and weather aware controllers.
Sprinkler Head Replacement
Replace broken, sunken or mismatched heads and nozzles so every zone waters evenly again.
Sprinkler Wiring Repair
Trace and repair cut, corroded or shorted valve wires when zones stop responding to the controller.
Helpful articles
Get your free estimate
Tell us what is going on with your system and we will get back to you with next steps and a clear price.