(786) 496-4049 Contact Us

Hurricane Season Sprinkler Prep for Miami Homes

By the Irrigate Miami team · Published October 18, 2026 · Updated October 19, 2026 · 4 minute read

Tall palms and lawn beside a South Florida home

Before a hurricane or tropical storm, turn your irrigation system off, secure anything above ground and protect the controller from power surges. After the storm, walk the yard and run each zone briefly to check for broken heads, leaks and lifted roots before you put the system back on its normal schedule.

The Atlantic hurricane season runs from June 1 to November 30, according to the National Hurricane Center, with most activity from mid-August to mid-October. In Miami that overlaps the wet season, which the National Weather Service in Miami puts at about May 15 to October 15, so your system should already be running less. Here is a checklist built on NOAA, FEMA and UF/IFAS Extension storm guidance.

At the start of the season

A little work in late May or early June makes storm week easier:

  • Know where your shutoffs are: the irrigation shutoff valve, the pump switch or breaker if you use a well or lake, and the main water valve.
  • Test the rain sensor. A storm drops plenty of water, and a sensor that works will stop the system automatically; Hunter (manufacturer) notes its wired sensor shuts watering down within the first few minutes of rain. See our Florida rain sensor law guide for a five minute test.
  • Write down your controller program or take a photo of each setting. Many older timers lose their program in an outage.
  • Consider surge protection for the controller. UF/IFAS Extension suggests a surge protector for irrigation controllers as part of storm prep.
  • Trim weak limbs near the rain sensor and over valve boxes, where falling branches do the most damage. NOAA lists keeping trees trimmed and securing loose outdoor items among basic storm prep.

When a storm is coming

  1. Turn the system off at the controller. UF/IFAS recommends turning irrigation off before a storm. The ground will be saturated, and watering only adds to flooding and runoff.
  2. On well or lake systems, switch off the pump so it cannot run during power fluctuations.
  3. Secure loose parts above ground, such as a hose bib timer, a portable controller or a loose rain sensor mount.
  4. Unplug the controller if it is plug-in and you expect power surges, and keep your program notes handy.
  5. Do not cover valve boxes with anything that could blow away or trap water.

After the storm

Wait until it is safe to walk the yard and any downed power lines have been handled by the utility. FEMA's Ready.gov warns that floodwater can be electrically charged by downed or underground power lines. Then:

  1. Look before you run. Check for broken heads, uprooted shrubs, crushed valve boxes and pipes pulled up with tree roots. UF/IFAS notes that storm damage to roots can also lift and damage irrigation lines.
  2. Check the controller. Confirm the clock and program survived the outage. If the screen is dead after power returns, the controller may have taken a surge.
  3. Run each zone for a few minutes with someone watching. Look for geysers, flooding at a head, weak spray or a zone that will not start. EPA WaterSense notes that water pooling between runs can be a sign of an underground leak. The county's repair rule allows testing outside your days, once a week, up to 10 minutes per zone, with someone present.
  4. Watch the soil, not the calendar. UF/IFAS Extension advises monitoring soil moisture after a storm instead of resuming the normal schedule right away. The ground may stay wet for days.
  5. Turn the rain sensor back on if anyone bypassed it.

If salt water reached your yard

Coastal neighborhoods sometimes get storm surge. UF/IFAS Extension advises getting fresh water to the roots of salt flooded plants once the salt water has gone down and it is safe, using the edge of the canopy as a guide for how far out to water. UF/IFAS also notes that the only way to remove salt from soil is to leach it out with plenty of water, either rain or irrigation, but flooding the soil all at once can starve roots of oxygen. Several moderate waterings work better than one long soak. Check for any county water use limits in effect after the storm before you start, and give plants a few weeks before you decide what did not survive.

Common storm damage we see

  • Heads snapped by debris or by cleanup crews and vehicles driving over the lawn.
  • Lines cracked by uprooted trees, often far from where the tree fell.
  • Controllers dead after a surge, or with the program wiped.
  • Rain sensors knocked off their mount or full of debris.
  • Valve boxes crushed under fallen limbs, sometimes with a broken valve inside.

Broken heads are a quick fix with our sprinkler head replacement service. Leaks from uprooted trees are a job for leak repair, and a dead or scrambled timer needs controller repair.

Get the system checked after a storm

A full tune-up after the season, or after any big storm, runs every zone, resets the controller for the drier months ahead and catches damage you might miss. It pairs well with our seasonal sprinkler schedule guide for the switch to the dry season.

Book a post storm check and tell us what you have already noticed in the yard.

Sources

Rules and figures in this guide come from the official sources below, plus manufacturer documents where marked. Rules change, so check the source before you rely on a date or a number.

Written by the Irrigate Miami team

Local irrigation technicians with over 20 years of experience repairing, installing and maintaining sprinkler systems across Miami-Dade.

Get your free estimate

Tell us what is going on with your system and we will get back to you with next steps and a clear price.

CallGet a Free Estimate